top of page
Writer's pictureShailesh G

Searching For a Low Cost STM32 Development Boards & Kits??

Updated: Aug 13, 2020

Now a days there are large number of online micro-controller sellers, to select a genuine seller which can provide a MCUs at low cost and with good quality is like finding a sewing needle in rice bundle. For reducing your efforts there are lot of low cost MCUs are listed in this blog. This will help especially to Freshers, New Embedded Developers and students to find the kit suitable for their project development.


Why STM32? 


STM32

The STM32 family of 32-bit micro-controllers based on the Arm® Cortex®-M processor is designed to offer new degrees of freedom to MCU users. It offers products combining very high performance, real-time capabilities, digital signal processing, low-power / low-voltage operation, and connectivity, while maintaining full integration and ease of development.


For the Freshers and developers who are going to use STM32 first time, here is a brief explanation of range of STM32 MCUs.The unparalleled range of STM32 micro-controllers, based on an industry-standard core, comes with a vast choice of tools and software to support project development, making this family of products ideal for both small projects and end-to-end platforms.

More details of STM32 MCU Famiily in Open Session by ST & PHYTEC



List of Some STMicroelectronics Development Boards & Kits:


The below list of STM32 MCUs are included with details about the facilities it provides along with the Price and for more information and for purchasing the product link is provided below every MCU Image.

1. NUCLEO-F030R8 ( Cortex-M0)

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)

2. STM32F0308-DISCO (Cortex-M0)

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)


3. STM32 NUCLEO-F103RB (Coretx-M3)

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)


4. STM32 STM32L152C-DISCO (Cortex-M3)

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)


5. STM32 NUCLEO-F302R8 (Cortex-M4)

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)


6. STMicroelectronics ST25DV-DISCOVERY

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Tanotis India)


7. STM32 NUCLEO-F722ZE (Cortex-M7)

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)


8. STMicroelectronics STM32F723E-DISCO

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)



9. STM32 B-L4S5I-IOT01A IOT Kit

For further details click on the link given-(Data Sheet)

For purchasing click on the link given-(Mouser)





10. STMicroelectronics STEVAL-STRKT01

For further details click on the given link-(Data sheet)

For purchasing click on the link given- (Digi-Key)




11. STM32F103C8T6 Mini System Development Board

For further details click on the given link-(DataSheet)

For purchasing click on the link given-(Roboelements), (Electronicscomp)



12. STLINK-V3MINI

STLINK-V3 compact in-circuit debugger and programmer for STM32.


The STLINK-V3MINI is a stand-alone debugging and programming mini probe for STM32 microcontrollers.

The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board. The STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART.

The STLINK-V3MINI is a portable version, easy-to-use debugger//programmer including STDC14 interface with its flat cable.

Key Features:

  • Stand-alone probe

  • Approximately 15 x 30 mm high-density integration PCB

  • Delivered with 1.27 mm pitch STDC14 debug connector and STDC14 to STDC14 flat cable

  • Self-powered through a USB connector (Micro-B)

  • USB 2.0 high-speed compatible interface

  • Direct firmware update support (DFU).

JTAG / serial wire debugging (SWD) specific features:

  • 3 V to 3.6 V application voltage support and 5 V tolerant inputs

  • JTAG communication support

  • SWD and serial wire viewer (SWV) communication support.


Virtual COM port (VCP) specific features:

  • 3 V to 3.6 V application voltage support on the UART interface.

  • 5 V tolerant inputs VCP frequency up to 15 MHz.

  • Drag-and-drop Flash programming

  • Two color LED's: communication, power

  • Includes STDC14 signals protection

For further details clink on the given link-(ST.com)

For purchasing click on the link given-(Mouser), (Futurelectronics)


 

If you find this blog post helpful? If so, then share to others so that they can also get an idea about the STM32 MCUs available in market.


I’m trying to improve my blog's usability. Is there anything on my site you’re having trouble finding or any errors let us know in comment section.


You can also ask doubts related to embedded systems in comment section. there are so many professionals present in this Phytec Embedded Form who can help you in clarifying your doubts.

Thankyou for visiting this Blog.



 

408 views0 comments

Recent Posts

See All

Comments


bottom of page